Product and brand number

1. What are our products?
Meiselui mainly produces cermet products; The company has been producing cermet products for the third generation. The indicators of the company have exceeded the domestic counterparts, which is in the leading level in China and is equivalent to the product indicators of international first-line factories.
 
2. What are the metal-cermet materials of Mercure?
The main brands of Mercor cermet are: MC102, MC911, MC206, MC509
 
3. Performance parameters of MC102
Density: 6.95 g/cm3, hardness HRA: 92.5, bending strength: 1800 N/mm2, fracture toughness: 10.5
 
4. Use of MC102:
Characteristics: on the basis of certain strength, it has high temperature red hardness and wear resistance. Suitable for small impact force, low load state finishing, super finishing. Suitable for processing bearing steel, carbon structural steel, low and medium alloy structural steel, gray cast iron and other materials.
Main application: turning finishing. Equivalent to ISO classification: P01-P05, K01-K05.
 
5.What are the performance parameters of MC206?
Density: 7.0g/cm3, hardness HRA: 92.5, bending strength: 2300 N/mm2, fracture toughness: 11.2
 
6. What is MC206 for?
Features: High hardness, high wear resistance, low friction coefficient. Used for finishing and semi-finishing of mild steel, normalized gear steel, gray cast iron, nodular cast iron. Main applications: turning and milling. Equivalent to ISO classification: K05-K10, P01-P10, M05-M10.
 
7.What are the performance parameters of MC509?
Density: 7.1g/cm3, hardness HRA: 92.1, bending strength: 2800N/mm2, fracture toughness: 12.4
 
8.What is the purpose of MC509?
Characteristics: It has high toughness and can withstand impact load. Can be used for low carbon steel, low alloy steel, gray cast iron and silicon aluminum alloy milling; Rough car, milling processing. Main application: Milling, wear - resistant parts. Equivalent to ISO classification: P10-P20, K10-K20.
 
9.What are the performance parameters of MC911?
Density: 7.05g/cm3, hardness HRA: 92.3, bending strength: 2000 N/mm2, fracture toughness: 11.3
 
10. What is MC911 for?
Characteristics: between MC102 and MC509, with strong resistance to crescent depression wear, good heat resistance, can bear a certain impact. Used for semi finishing of low carbon steel, low alloy steel, bearing steel, gray cast iron, silicon aluminum alloy and stainless steel.
Main applications: turning and milling. Equivalent to ISO classification: P05-P15, K05-K15, M05-M20.
 
11. Have Mercure products been tested by the third party?
Meiserui cermet products have been tested by Chengdu Institute of Technology and Powder Metallurgy Testing Center of Central South University and other relevant authorities, and the test report has been issued.