Craftsman's Soul, today is a little better than yesterday

The name of craftsman has a long history, from being despised by people to being praised and even touted by people now. Its essence has never changed with the ups and downs of history, especially in today's impetuous era, it represents the persistence of an era, and is closely linked with the firm, practical and striving for excellence attitude. It is not only a feeling but also a responsibility. It stands firmly in the opposite of bombastic and gaudy.

 

He is active in the production line, making products with his heart and focusing on the work. He seems to have been in the span, from what will not be the blade processing small white, to now can independently control the value of tens of millions of CNC equipment skillful craftsman; From "0" to "1", "1" to "hundreds of thousands", countless parameters are known by heart. He spent three years transforming himself from an outsider to an expert, working on his own while also leading a small team to develop new talent. "There are no complicated secrets," he says. "There are no shortcuts to share. It's just focus and continuous learning."

 

His name is Zhong Shouwei, an advanced individual among many professionals in Mexaru. He is engaged in CNC process operation. He is a representative of countless outstanding front-line producers with strong accumulation and steady development and diligent dedication.

 

When I met Zhong Shouwei for the first time, I was deeply attracted by his dedicated and meticulous working state. Wearing a dust mask and neat overalls, he paid attention to the data of machine operation and patiently explained the key points to the new employee. When he learned that we wanted him to share the growing process, he was a little confused at first, then he changed his seriousness at work and smiled shyly. Probably never standing in the spotlight, he is used to unknown in the lonely walk alone. He insisted again and again that he is actually very ordinary, all the results are just by a bit of study accumulation, and there is no extraordinary place. However, if these can help other colleagues, raise some new people that I am also very willing to share, is a review of the past few years, I hope to make a contribution to the company. From his words, it seems that it is not difficult to see that he has a feeling of family towards the luxury.

 

First, start from zero, the weight of responsibility

Zhong Shouwei said he to the United States much sharp before engaging in surface grinding machine, work repetition boring, do not have too much development space for individuals, he focused feel can't waste time on such work, so by chance in 2014 to enter the luxury, from that time he first contact blade processing, just know originally blade variety, style each different, also applied to the field also confused, before that, for the blade, milling cutter is not the concept, not to mention what trough type, parameters, and so on. It was a fresh start and, in his own eyes, an important turning point. Brand-new cognitive experience brings novelty and joy, but when I really practice, I know that everything is not easy. Listening to his understatement of his work changes, I can feel a kind of dissatisfaction with the ordinary life in his bones, and his eyes can see the flicker of upward power.

 

From his point of view, he feels lucky to come here, mainly because it is not just a place to work, but a platform where he can learn skills, a group of enthusiastic colleagues, a hands-on teacher, who selflessly impart his technical experience. But he says this is now he didn't understand at the time of review, "and now the new colleagues, just began, I am a cheat every mind is in" lianliankan ", make the product model of the simple word hard into the brain, they and I learn new knowledge together, try to have a general understanding first. After this, I took my spare time, holding the drawings, repeatedly read the meaning of various letters and numbers, looking for waste blades to compare and deepen my memory. The product is understood clearly, wait until the time that learns the tool to grind the actual processing, began to be difficult again." In the insipidity of his mind journey, we see a man who is not afraid of new things. Indeed, he is simply "fit in", but how many people will secretly master every moment of their work process in their spare time and try to understand them from a larger dimension? Wei is not naturally good at, he also worried about that predecessors more comfortable operation, their turn operation system, a fast, slow, loopholes in the end, oneself also can't determine whether qualified, each a product will stop to see, greatly reduces the production efficiency, time delay, the products are also basic is defective goods, in addition to these, and the tooling, grinding wheel, etc, each procedure, directly related to the success of the product quality. He said: "From then on, I really feel the 'craftsman' is not easy, the birth of each product, have put a lot of effort, as the creator, must be responsible for their own products!" Although his approach seems simple and effective: don't learn, don't understand, ask, and after a long time of effort, the problem in front of you can be solved. But, deep down, the underlying cause and motivation was his sense of responsibility, which drove him to find a solution.

 

It is also the sense of responsibility that makes him not slow down when he gets started. Compared with other colleagues, they do things quickly and well, but he has just figured out the way, and still has a long way to go. Therefore, he said: "People should learn to constantly reflect, I adjust a good tooling can shorten the existing time; There are other ways to save time and effort by opening a slot; How long will it take to fix the grinding wheel once and adjust the size..."

 

Second, from qualified to beyond, never stop

Shou Wei told us, has been a technical worker he knows: time is the cost, quality is everything, and we have higher requirements in the United States and luxury, only by constantly improving efficiency, can we produce one or several more products, for our endless orders to do a good job of complete rear supply.

 

To this end, he set foot on the journey of exploration and attempt. If the previous effort is only to become a qualified craftsman, when he began to explore, he was behind the figure of the craftsman spirit. When adjusting the tooling, prepare the required tools in advance, and adjust them to the most suitable location for the most convenient processing in the shortest time; Pay attention to how to repair the grinding wheel does not bounce, easy to use; Adjustable blade size, relations between the bearing and the product size of machine tools, such as C trough, add and subtract a two axis, the ligament width 3.5 silk, and total width can add and subtract two or three wire, S trough, 0.2 to 0.4 arc tip, X axes from ShiSanSi silk, so it can calculate how much just the right size, reduce the number of size, don't have to try many times are adjustable slowly is not good, how many in a grinding wheel about trim size, into how much, can be set only once or twice, thus saving a lot of time. As a result, his efficiency has improved a lot, from 70/80 pieces a day to 170/180 pieces a day, even more than his colleagues' capacity.

 

When Zhong Shouwei said this, his whole face began to shine with extremely confident eyes. It is not difficult for us to see that on the basis of many practices and through continuous technical breakthroughs and summaries, he gradually emerged in his work with his attitude of paying close attention to skills and steadfast learning. The young man told me, "It's always a good idea to talk less and do more. It's not uncommon for people to drink water in order to make progress. Focusing on what I'm doing and looking at the finished product makes it all worthwhile." We know he's proud, it's not just a job, it's a career.

 

Three, rather than let The Times and so on, it is better to catch up

"At work, Zhong Shouwei is a thoughtful person who dare to think and act. He is also meticulous and pragmatic, willing to accept new things. He is a person worth learning," said his colleagues. After two years of work, Zhong Shouwei has a deeper feeling about technical work: one person operates one machine, but the production capacity is always limited. He has to work overtime to catch up with the products, but the growth of production capacity is still at a bottleneck stage. Fortunately, the company soon introduced the automatic slotting machine, realized the artificial to mechanical transformation, output value immediately improved, significant. But this also makes him realize that it is time to deal with the machine, day in and day out, people can't do it, but the machine can, in order to achieve productivity increase, it is necessary to learn how to deal with the machine. That said, it feels like it's back to zero to one. Everyone is afraid of going to zero. Life is too short. Every time you start from zero, all your experience is gone. What makes Shouwei strong is that he tries to bridge the gap between old and new jobs.

 

"I have a lot to learn, machine adjustment, programming code, operation...... Fortunately, I have learned tooling debugging before, and the principle of slotting machine is the same, learn to program can be simple operation, so it is fast to get started. It also made me realize that all the knowledge I've learned is an invisible accumulation that you never know when you're going to use." Indeed, we all know that for a person who is used to manual operation of traditional technology, the sudden switch to machine operation, even if the contact is very difficult. However, Zhong Shouwei overcame the difficulties step by step. He was not familiar with the program code, so he always reminded himself to remember more carefully and master every code and the meaning of every number change. Zhong Shouwei said that in the process of operation will also encounter many details of the problem, a little bit of incompleteness, there may be problems affecting the work process. "I also hit a grinding wheel. No one blamed me too much, but I felt guilty, which inspired me to master it."

 

From the program code to the actual peripheral mill operation, peripheral mill machinery variety, Japan WAIDA, Tentong, Agaton, different machinery different operation different systems. Zhong Shouwei always squeezed out time after work to consolidate and strengthen his knowledge. In actual operation, he followed his master and recalled the information and knowledge while reading. "From one slotting machine to several machines, from the initial slotting of more than 100 pieces to the current processing of thousands of pieces a day, the joy of capacity doubling is often the most experienced by workers like us."

 

Today's era, sounded the alarm for every worker, look AI will replace all the manual, in fact is not the case, out of this age is hidebound, and forge ahead of the strivers, they always stand in the forefront of The Times, poor is changed, permanence follows, they will change as a basic rule of survival..

 

Take one more step than you were yesterday

With three years of working experience and research experience, Zhong Shouwei is already ahead of his peers in terms of work level. However, he is consistent and dedicated. Zhong Shouwei is worthy of being advanced. "I don't know when this responsibility started, but the time frame is very strong on us, and any time lost by other factors must be made up for by our overtime work. Young man, it's okay to suffer a little for work as long as your body can handle it. What's more, on the road of Mercer artisans, only continuous learning and improvement can meet the needs of the rapid development of the company. Only by focusing on the work can we make more progress than yesterday, "Zhong Shouwei said.

 

If you line up Zhong Shouwei's output on a timeline, you will find that it has not been a uniform path. Over the past three years, there have been rapid progress, but also quiet progress. But the track source of life in the individual choice and pursuit, no matter the ordinary matter also someone strive for acme no longer difficult, too difficult, also someone grit one's teeth to insist. Just like Zhong Shouwei said, maybe there is no shortcut at all, if you want to do the work at hand better than others, just keep learning, focus on the work. Work is a career and we should treat it with our heart. May each of us have the spirit of craftsmanship and ingenuity to make every step well and realize our wonderful life!

 

Zhong Shouwei is the most impressive place, his eyes looking at the poem and the distance, but tightly your feet will be buried in the earth, he never went to rhetoric experience today I for peak mountain climb world scene, but kept telling myself, today this step I already more than yesterday, more than a little bit of that is enough, short step that thousands of miles, but the pace of progress in more than a little a day is probably the most solid way of craftsmen's the soul of it.